***********

86-93 Mustang 5.0 Kit

Mustang 5.0 Kit On 3 Performance Graph Mustang 5.0 Kit

 

 

 

 

  • - 1986 – 1993 Foxbody 5.0 Mustang Single Turbo Kit

  • - 500+ Rear Wheel Horsepower/650+ Torque

  • - Kits Are In-Stock and Ship DAILY!!!

We are introducing our new kit to the market for your 5.0 1986 – 1993 Mustang. We developed this kit over the last year and have put together what we think is the best horsepower per dollar modification you can do to your car 5.0. You can literally bolt this kit on and literally double the factory horsepower(Close to TRIPLE the torque). Most stock 5.0 motors will put down around 185 +/- rear wheel horsepower. The newest install yielded 488 rear wheel hp and 666 rear wheel torque at 16psi, 10 degrees of timing and pump gas. The car had a stock 96 Explorer 5.0 longblock and only upgrade was a 65mm throttle body and a FMS B cam.
On the streets, this car is an absolute animal with the kit installed. We are running 275/60/15 M/T drag radials on the car and it will blitz them 1-3 gear on the streets on the 7psi. As far as street drivability of the car with the kit install, it really didn't even change. We did run it with just the open downpipe so it was loud, other than that the car ran and drove down the street about the same as it did before the install. With the kit you will retain the power steering but in order to fit the turbo and downpipe, the kit doesn't make room for you to run A/C or Smog.
The On 3 Performance kit up for auction here includes all the components to get your turbo kit on your car and ready to get it back up and running. As you will see from our photos, this kit bolts on to your car and was actually designed and tested by us so we know the kit and we know it works. Honestly, I don't think there is any other turbo company out there that has a kit below $2,749 that can say the same thing and contain as complete of a kit as we have put together.

86-93 Mustang 5.0 Kit

 

 

 

86-93 Mustang 5.0 Kit

Each Kit includes:

  • - Turbo Headers and Crossover Tubing Constructed of 304 Stainless

  • - Turbocharger - .70ar Coldside, .68ar Hotside, and T-4 Flanged

  • - 3" 304 Stainless Steel Downpipe, V-band Connections

  • - 304 Stainless Steel Dump Tube

  • - 3" Intercooler, Inlet and Outlet - Tube and Fin Core

  • - 3" 304 Stainless Steel Intercooler Piping, Turbo to Throttle Body

  • - All Silicone Couplers Needed and Stainless Steel T-bolt Clamps

  • - On 3 Performance 38mm Wastegate

  • - On 3 Performance Blowoff Valve

  • - Blow-off Valve and Wastegate Flanges Installed and Welded

  • - 304 Stainless Steel Power Steering Cooler Line

  • - On 3 Performance Boost Controller

  • - Oil Feed Kit With All Fittings – Stainless Braided Feed Line

  • - Oil Drain Kit With All Fittings

  • - Alternator Relocation Bracket kit

  • - Stainless Steel V-band Clamps

  • - Complete Fastener Kit With Gaskets

  • - Small Zip-Ties ( To Secure Vacuum Connection )

  • - Complete Instruction Package with Photo, Amazing We know!

 

 

     

    Order Now mustang kit 5.0!

     

    ANY ADDITIONAL QUESTIONS OR FOR ORDERING:


    614-439-0057

     

    On 3 Performance
     

 

 

 

On 3 Performance Injectors (Set of 8)