On 3 Performance 8.8 Foxbody 28 Spline 5 – Lug Conversion Kit, 900hp Axle Rating
*****We are running a HUGE Discount, ALL OF THESE KITS WILL REQUIRE C-CLIP ELIMINATOR KITS****
WE ARE COMPLETELY OUT OF ROTORS/DRUMS, YOU CAN BUY THEM DIRECTLY AT THE PARTS STORE SO WE WILL PROVIDE YOU THE PART NUMBERS TO PURCHASE AFTER PLACING THE ORDER.
THE GROOVE FOR THE C-CLIP IS MIS-MACHINED
WE CAN SELL A SET OF AXLES BY THEMSELVES FOR $129 IF INTERESTED
On 3 Performance LLC
1979 1993 Mustang Complete 5 Lug Conversion Kit
ALL BRAND NEW AND 1 YEAR WARRANTY ON AXLES!!!
Read the full ad before buying!!!
This is a new project that we have been working on and finally ready to release. With the purchase, you will receive a set of 28 spline axles to be included with your purchase. The axles are oversized, stronger than stock and a direct fit for your 8.8 housing up to 1993 model year.
Even though the axle is oversized, its the largest diameter you can run with the stock bearings. The axles do not tape down and keep the same diameter throughout. As you can see there is a 2.225lbs difference from a stock axle to our new 5 lug axle! We run these in our shop 9 second street/drag car and never have an issue. Race with confidence
Another thing people do is swap to axles from other vehicles which have always had the axle turned in one direction. Once installed into a Mustan 8.8, that axle is now going to be turned the opposite direction. That can weaken the axle and be much more prone to breaking. Our axles are far from stock and designed with higer hp and drag racing in mind. Buy something you know is proven and you know will last and handle the power you throw at it
If you are unsure of your application and wanted to use on another vehicle other than the Mustang, measure your axle length. Axle length is 29 5/32 long
Look at the specs below:
Stock Axle weight: 14.10 lbs
On 3 Performance Axle Weight: 16.35
Stock Axle Diameter: 31.61mm
On 3 Performance Axle Diameter: 35.15
Currently most people are forced to either spend $400+ on the brand name kit or else pick and pull random parts from junkyard vehicles. This simplifies the whole situation, the kits arrive BRAND NEW and ready to drop in. You are not just buying a name here, you get high quality parts and pay a fraction of the cost compared to the other kits on the market. Why go with a kit that consists of refurbished axles from a random vehicle when you can get a new setup for almost the same price? These are specifically manufacture to our specs and designed for this conversion exactly.
INCLUDED WITH THE KIT:
A lot of people are asking about what wheels will clear the setup. The rear is never a problem but the fronts are normally what can sometimes have clearance issues. We have included the following photos to show you the exact hub diameter to find out if it will clear your hub area of your wheel. Wheels we have ran here:
Greg Weld Drag Stars (In the photo)
Stock 05+ GT with spacers
95 Cobra R Wheels
16 SN95 Pony Wheels
Weld (Measure hub area, most will work)
Some 99+ Wheels, Sometimes Dust Cap Does Interfere
There are many other wheels that do clear but these are the ones that I know for sure and we have tested with. Measure your wheels first before bidding based off our photo of the hub. The measurements are taken from the base of the rotor that lays flat against your wheel.
Shipping will be a flat rate of FREE to the lower 48 usa states. We will ship outside the usa to verified paypal and ebay members. Please first email for shipping quotes before clicking buy it now if you are located in AK, HI, OR OUTSIDE THE USA.
All Ohio sales are subject to 7.5% Ohio Sales Tax
ALL SALES ARE FINAL! Products are sold as brand new and inspected prior to shipping. Its getting old with people bidding and not following up on sales or backing out. Only click buy it now if you have intentions of paying and following though with the order.
Products are brand new and included everything from the photo unless otherwise specified. Buyer takes all responsibility for this product and the install of the product on the car regardless of any condition. We will not be held liable for any damages or injury do to the install or use of this product. If purchasing from out of the USA, we will only ship to verified Paypal members. All sales are final unless otherwise specified in the auctions. We always package the items sufficiently and use adequate packing material to prevent damage. Unless insurance is purchased, the buyer will be responsible if the product is damaged during transit. We ship UPS and USPS Internationally so if there was damage, you would want to file with the delivery driver if there was visible damage. We are always willing to work with customers in order to keep satisfaction to a certain point. As you will see we offer many products and are not going anywhere. Buy with confidence and enjoy