On 3 Performance Digital Touch Screen Electronic Boost Controller – 6 Stage w/ 3-Port Mac Valve
You are looking at the most versatile and advanced boost controller for the money currently on the market. In addition, the only to my knowledge touch screen interface used to program your boost level and stages. This specific electronic boost controller is a open loop style programmable boost controller featuring 2.8″ touch screen adjustability and boost pressure readout. This controllers also feature built in fail safe protections for wideband (lean Air/Fuel ratio cut), fuel pressure (low fuel pressure cut), and overboost cut where the boost controller will revert to spring pressure if any fail safe is tripped. These Boost controllers will accept a 0-5V input from a customer supplied wideband or fuel pressure sensor.
You can virtually use this controller as a way to control traction on less than ideal conditions. Instead of running a set boost pressure, you will have 6 different stages of boost you can program to ramp in by time so you can get the car moving and keep spinning to a minimum. Check out the videos if you are not familiar with this style controller which is a game changer for those doing the “no prep” thing
Features 2 external trigger inputs included for launch control when in boost by time, or stage up. The controller is capable of being used in conjunction with a 2-step and / or trans brake.
***This controller will INCLUDE a 3 port mac valve (boost solenoid) standard with all kits AS WELL AS THE REQUIRED map sensor***